FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 686 Parts

Category: Hitch / Drawbar

[Categories] [All 686 Parts] [All Farmall Models]

Center Link Handle - Used on International Models: 21026, 21206, 2606, 2706, 2806, HYDRO 100, HYDRO 70, HYDRO 86, 100, 1026, 1066, 1206, 1256, 130, 140, 1466, 1468, 1566, 1568, 2504, 404, 504, 544, 606, 644, 656, 664, 666, 686, 706, 744, 756, 766, 806, 826, 844, 844S, 856, 966. This part replaces 392204R1 (Item #: 164316, Ref: 392204R1) $23.90

Crank Handle, Lift Arm Screw - 3 point or fast hitch. For tractor models 230, 330, 400, 450, 560, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, International Utility: 300, Farmall Rowcrop: 300, International Utility: 340, Farmall Rowcrop: 340, International Utility: 350, Farmall Rowcrop: 350, International Utility: 404, Farmall Rowcrop: 404, International Utility: 460, Farmall Rowcrop: 460, International Utility: 504, Farmall Rowcrop: 504, International Utility: 544, Farmall Rowcrop: 544, International Utility: 606, 656, Farmall Rowcrop: 656, Hydro 100, Hydro 70, Hydro 86. (Item #: 108883, Ref: 523861R2) $9.80

Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50

Drawbar Support Casting - Used on tractors with Three Point Hitches, this part measures 1 inch X 3-1/2 inches X 16.00 inches. It is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. Replaces 389360R1. (Item #: 108818, Ref: 389360R1) $402.00

Drawbar, Front Tube - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, Replaces International OEM number 389100R11, Tube length: 25.50", (Item #: 170028) $258.00

Duckhead - This leveling screw pivot, also know has duckhead, fits 1 inch screw. For tractor models Hydro 100, Hydro 70, Hydro 86, 1026, 1066, 1466, 1468, 21026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966. (Item #: 172990, Ref: 383990R2) $105.00

Duckhead Pivot Assembly - Duckhead Pivot Assembly, 1 inch Screw Includes: duckhead, collar w/ set screws, hardened washer and weld on washer. Fits 1 inch Shaft. Contains 1 - 383990R2, 2 - HD78CUP, and 1 Set screw. (Item #: 122667, Ref: 223315) $69.00

Front Stabilizer Eyebolt - Used with 382386R2 stabilizer control arm, this Eyebolt is used on International models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 21026. Replaces International OEM number 382390R1 (Item #: 108857, Ref: 382390R1) $33.70

Inner Pipe - Associate parts for this Inner Pipe are 384852R1 Pin, 389369R1 Yoke, 389370R11, Lockout pin, 400836R1 Clevis. It is used on International models Hydro 70, Hydro 86, 544 (1/1966 - 12/1973), 656 (1/1966 - 12/1973), 664 (1/1972 - 1/1973), 666 (1/1972 - 1/1973), 686 (1/1969 - 12/1971), 2544 (Diesel), 2656 (1/1963 - 12/1971). Replaces 400835R1 (Item #: 108821, Ref: 400835R1) $64.00

Latch, Telescoping Lift Arm - For Cat II 3 point hitch. Models: 100, 1026, 1066, 1086, 1206, 1256, 130, 140, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 986. Lower latch spring 382192R1 and upper latch spring 382193R1 are available separately. (Item #: 109475, Ref: 398373R1) $28.40

Lateral Limiter Clevis - Used in association with 384852R1 Pin, 389369R1 Yoke, 389370R11 Lockout pin and 400835R1 Inner pipe, this Three Point Lateral Limiter Clevis measures 7.310 inches long. It is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108851, Ref: 400836R1) $173.00

Leveling Assembly Kit - Consisting of one each of the following, 523861R2 handle, 223315 duckhead, 389542R11 screw, 538970 (housing 16.750 inches long), this kit is used on International models Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 128562, Ref: 223306) $195.00

Leveling Screw Assembly - Measuring 25.500 inches this leveling screw has a 1.000 inch diameter and 6 inches of threads. It is used with 223315 - Duckhead Pivot Assembly, 523861R2 - Crank Handle and 538970R1 Leveling Screw Housing (each sold individually). Used on Hydro 70, Hydro 86, 544, 656, 666, 686. (Item #: 108836, Ref: 389542R1) $44.80

Leveling Screw Housing - Used on both 2 point and three point hitches, this part is used with 389542R11 Screw. It is 16.750 inches long and threaded for a 1 inch screw. Replaces 538970R1, 389538R1. Used on Hydro 70, 544, 656, 664, 666, 686. (Item #: 108815, Ref: 538970R1) $69.00

Lift Arm Latch - This Lift Arm Latch is used on 2504 Indust/Const, 2544 Indust/Const, 2606 Indust/Const, 2656 Indust/Const, 504, 544, 606, 656, 664, 666, 686, Hydro 70, Hydro 86. It replaces 380993R2, 380993R1 (Item #: 111394, Ref: 380993R2) $35.00

Lift Arm Latch, Used - For International tractor models Hydro 100, Hydro 186, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 2756, 2826, 2856, 3088, 3288, 3488, 3688, 21026, Replaces International OEM number 398373R1, Use with Lower Spring - 109644 and Upper Spring - 108835, For a new version of this item use Item #: 109475, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409475) $14.51

Lower 3 Point Latch Spring - Four of these are used per tractor. Sold individually. This part Measures 0.075 inches thick, 5.896 inches length, 0.325 inch hole diameter and tapers 0.200 to 0.755 inches width. This part ships bare metal. Replaces 380992R1, 392882R1 (Item #: 155918, Ref: 392882R1) $14.70

Lower Link Pin Retainer, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 21026, 21206, 21456, Replaces International OEM nos 406687R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453564) $9.01

Pin, Front Drawbar - 1" pin diameter, 2.50" usable length, 3.120" overall length, 1.50" head dia. For tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, (4100, 4156, 4166, 4186 thid id drawbar support arm pin for these models), 2544, 2656. (Item #: 170296, Ref: 439-51644) $7.10

Stabilizer Control Arm - International Tractors Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 all use this Stabilizer Control Arm on Three Point Hitches. (Item #: 127417, Ref: 389362R1) $226.00

Stabilizer Control Arm, Used - For International tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389362R1, For a new version of this item use Item #: 127417, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 427417) $134.01

Stabilizer Eyebolt, Rear - Used on Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, this Eyebolt replaces International part number 389371R1. (Item #: 152201, Ref: 389371R1) $31.00

Stub Drawbar - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686 this drawbar measures 26-1/4 inches long, 2-1/2 inches wide and 1-1/2 inches thick. It has 1.040 inch diameter holes at 6.390 inches and 8.390 inches from the front. Replaces 389099R1 (Item #: 110316, Ref: 389099R1) $136.00

Sway Limiter Lockout Pin - Part number 389370R11, Sway Lockout Pin, is used on International models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656 (Item #: 108853, Ref: 389370R11) $8.20

Sway Limiter Yoke Pin - Used on both the forward and rear yokes, this pin measures B - .621 inches in diameter, and A - 2.05 inches long. Used on Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 786, 1026, 2544, 2656, 3088, 3288, 3488, 3688. This pin replaces part number 384852R1 (Item #: 108854, Ref: 384852R1) $3.60

Three Point Hitch - This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end and Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size limitations for UPS. This hitch kit must ship via LTL freight truck. (Item #: 1000051, Ref: IHS3009) $1799.99

Three Point Lateral Limiter Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 544, 656, 664, 666, 686, 2544, 2656, Replaces International OEM number 389369R1, (Item #: 108852) $43.60

Top Link Bracket - Used on International models Hydro 70, Hydro 86, 544, 656, 666, 686, this new Top Link Bracket replaces part number 389372R41 (Item #: 109483, Ref: 389372R41) $162.00

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $9.20

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184153, Ref: FH1447) $364.00

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. (Item #: 184167, Ref: FH1448) $364.00

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. Left Hand. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179611, Ref: FH14416) $439.00

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. Right Hand. The Bent Type spaces out at 32 inches between the ends of the tongs. The Non-Bent Type spaces out at 26 inches between the ends of the tongs. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. (Item #: 179008, Ref: FH14417) $439.00

$Farmall 686 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $57.00

$Farmall 686 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $39.30

$Farmall 686 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$Farmall 686 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $42.10

$Farmall 686 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $57.00

$Farmall 686 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $57.00

$Farmall 686 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $132.00

$Farmall 686 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $94.00

$Farmall 686 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $95.30

$Farmall 686 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $99.00

$Farmall 686 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $284.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $31.10

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.30

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $45.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $41.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $61.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $55.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $64.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $60.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $36.00

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $337.00

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $330.00

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.90

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $27.40

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $62.00

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.30

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $25.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 686 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy